installing hurricane shutters on vinyl siding

Installing Shutters on Vinyl Siding. Drill a hole into the side of the house at the center of the bottom slat.

Shutters Or No Shutters On Your House From The Hartland

Screws corrosion-resistant recommended Measuring tape.

. Installing Hurricane Shutters On Vinyl Siding Hurricane Fabric. First place your plywood piece inside of your window frame. The Federal Alliance for Safe Homes.

Hurricane Protection over Vinyl SidingWindows. Using 4-inch barrel bolts secure your panels to the frame. The pros will usually do this on.

There is a program existing where there are tremendous. Plywood Boarding for Stucco or Brick Houses. Attach the shutters to the vinyl siding after the pilot holes have been drilled on the shutters and the siding take one of the shutters and place it in position.

Drill drill bits. Install an anchor into. Using metal screws with painted heads is an alternate.

This step involves drilling a pilot hole into the shutters all the way through using a drill bit the same diameter as the shaft of the fastener. Attaching the shutter step 1 position the shutter along the side of the window or door. 1 practice installing all of your hurricane shutters and time how long it takes to.

Follow by installing the fastener through the hole. Put your shutters up and install them with your screws taking special care not to overtighten tighten to just snug. Install Bottom Base Slat.

Use silicone caulk to hold. Hurricane protection over vinyl sidingwindows. Mark six 6 spots on each shutter see drawing below.

Place the bubble level on top of. You might also want to check with the local insurance agents. Barrel bolts for masonry homes Quick Tip 1.

We have 7 days a week hurricane shutter installation support.

Plywood Vs Steel Vs Aluminum Window Panels Which Is Best